Description
Audio-Technica U853R Cardioid Condenser Hanging Microphone for Recording Application
Perfect for speech, theater, orchestra, and choir sound reinforcement and recording, the U853 condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. This phantom-powered microphone accepts interchangeable elements – omnidirectional (360°), cardioid (120°), hypercardioid (100°)
U853R: cardioid polar pattern (120° acceptance angle); 25.0′ (7.6 m) cable terminated with a TA3F connector for use with the included AT8538 phantom power only in-line power module (80 Hz high-pass UniSteep® filter); black finish.
Features
- Designed for suspension over choirs, instrumental groups and theater stages
- Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Low-profile design with low-reflectance finish for minimum visibility
Specifications
Microphones Element: Fixed-charge back plate, permanently polarized condenser Frequency Response: 30-20,000 Hz Low Frequency Roll Off: 80 Hz, 18 dB/octave Open Circuit Sensitivity: -39 dB (11.2 mV) re 1V at 1 Pa Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 115 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 mA typical Switches: Flat, roll-off Weight (Microphone): 0.5 oz (14 g) Weight (Power Module): 2.9 oz (81 g) Weight: 14 g (0,5 oz) Cable: 25.0′ (7.6 m) long (permanently attached to microphone), 0.13″ (3.2 mm) diameter, 2 conductor shielded cable with TA3F-type connector Dimensions: 1.34″ (34.0 mm) long, 0.48″ (12.2 mm) diameter Dimensions (Power Module): 3.66″ (92.9 mm) long, 0.74″ (18.9 mm) diameter Dimensions (Microphone): 1.34″ (34.0 mm) long, 0.48″ (12.2 mm) diameter Output Connector (Power Module): Integral 3-pin XLRM-type Output Connector: Integral 3-pin XLRM-type Accessories Included: AT8153 two-stage foam windscreen; AT8451 steel hanger; AT8538 power module; AT8438 5/8″-27 stand adapter Audio-Technica Case Style: M12 —————————————————————————————————————-
Reviews
There are no reviews yet.